Technical Specifications:
- Part Number: JL727A (US: JL727A#ABA)
- Product Line: HPE Aruba Networking CX 6200 Switch Series (Fixed Configuration)
- Form Factor: 1RU rack-mountable
- Management Type: Layer 3 Managed, Stackable
- Total Ports: 52 ports (48 access + 4 uplink)
Port Configuration:
- Access Ports: 48 x 10/100/1000BASE-T Gigabit Ethernet RJ-45 ports
- Auto-sensing, auto-MDI/MDIX
- IEEE 802.3, 802.3u, 802.3ab compliant
- All ports support Class 4 PoE
- Uplink Ports: 4 x SFP+ (Small Form-Factor Pluggable Plus) slots
- Support for 1GbE or 10GbE SFP/SFP+ modules
- Flexible uplink configuration for core or distribution connectivity
Power over Ethernet (PoE):
- PoE Standards: IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
- PoE Classification: Class 4 PoE on all 48 Gigabit ports
- Power per Port: Up to 30W per port
- Total PoE Budget: 370W available for powered devices
- Intelligent PoE Management: Real-time PoE monitoring and allocation with visibility via Network Analytics Engine
- Powered Device Support: IP phones, wireless access points, security cameras, IoT sensors, LED lighting, and other PoE-enabled devices
Performance Specifications:
- Switching Capacity: 176 Gbps (non-blocking)
- Throughput: 130.9 Mpps (Million packets per second)
- Latency:
- 1 Gbps: 2.28 microseconds
- 10 Gbps: 1.46 microseconds
- ASIC Architecture: Aruba Gen7 ASIC for wire-speed performance and extremely low latency
- Packet Buffer: 8 MB packet buffer memory for improved performance under congestion
- MAC Address Table: 16,000 entries
Processing & Memory:
- Processor: Quad-Core ARM Cortex™ A72 @ 1.8 GHz
- System Memory: 8 GB DDR4
- Flash Storage: 16 GB eMMC for OS, configurations, and logs
Advanced Layer 3 Routing:
- Static Routing: IPv4 and IPv6 static routes
- OSPF Routing: Access OSPF (OSPFv2 and OSPFv3) for dynamic routing
- Route Redistribution: Between static and OSPF
- Virtual Routing and Forwarding (VRF): Logical network segmentation
- Policy-Based Routing (PBR): Traffic steering based on policies
Layer 2 Features:
- VLANs: IEEE 802.1Q VLAN tagging, up to 4,094 VLANs
- Link Aggregation: IEEE 802.3ad LACP with up to 256 aggregate groups
- Spanning Tree Protocols: RSTP (802.1w), MSTP (802.1s), Rapid Per-VLAN Spanning Tree (RPVST+)
- Loop Protection: Advanced loop detection and prevention
- Jumbo Frame Support: Up to 9,198 bytes for improved throughput
Quality of Service (QoS):
- Traffic Classification: 802.1p CoS, DSCP-based classification
- Queue Management: Eight hardware queues per port with weighted scheduling
- Rate Limiting: Ingress and egress policing and shaping
- Priority Queuing: Strict priority and weighted round-robin scheduling
Security Features:
- Access Control Lists (ACLs): Time-based and port-based ACLs with IPv4/IPv6 support
- IEEE 802.1X: Port-based network access control with RADIUS authentication
- MAC Authentication: MAC-based authentication for non-802.1X devices
- Aruba Dynamic Segmentation: Role-based access control without complex VLAN configurations, enhancing security and simplifying access for users and IoT devices
- Secure Management: SSHv2, SNMPv3, HTTPS, TACACS+, RADIUS
- Port Security: MAC address limiting and sticky MAC
- DHCP Snooping: Protection against rogue DHCP servers
- Dynamic ARP Inspection: Protection against ARP spoofing attacks
- IP Source Guard: Prevents IP address spoofing
- Storm Control: Broadcast, multicast, and unknown unicast storm suppression
Network Analytics & Monitoring - Aruba Network Analytics Engine (NAE):
The integrated Network Analytics Engine provides unprecedented visibility and proactive troubleshooting:
- Built-In Analytics: Real-time monitoring without external collectors
- Automated Interrogation: Continuously analyzes events impacting network health
- Python-Based Agents: Customizable monitoring scripts for specific use cases
- Time Series Database (TSDB): Stores configuration and operational state data for historical analysis
- Proactive Alerts: Automatic notification of anomalies and potential issues
- Troubleshooting Acceleration: Quickly identify and resolve network, system, application, and security issues
- REST API Integration: Export telemetry data to third-party analytics platforms
Stacking & Scalability - Aruba Virtual Stacking Framework (VSF):
- Stack Size: Up to 8 switches in a single logical stack
- Total Port Density: Up to 384 ports (48-port models) in a single stack
- Stacking Bandwidth: High-performance front-plane stacking via uplink ports
- Single Management Point: Manage entire stack as one logical unit
- Hot-Swap Members: Add or remove stack members without disrupting operation
- Distributed Architecture: Fully distributed forwarding and control plane for resilience
Management & Automation:
Aruba Central Cloud Management:
- Cloud-native network management platform
- Centralized configuration, monitoring, and troubleshooting
- AI-powered insights and recommendations
- Zero-touch provisioning for rapid deployment
Aruba NetEdit:
- Network-wide configuration automation
- Policy conformance validation and enforcement
- Search, edit, validate, deploy, and audit capabilities
- Pre-deployment configuration verification
- Post-deployment conformance checking
Aruba CX Mobile App:
- Bluetooth-enabled switch discovery and connection
- Smartphone/tablet-based setup and configuration
- Barcode/QR code scanning for device registration
- Simple stacking configuration
- Export configuration to NetEdit for ongoing management
- One-touch deployment for simplified installation
Traditional Management:
- Web-based GUI (HTTPS)
- Command Line Interface (CLI) via SSH or serial console
- SNMP v1/v2c/v3 for integration with existing NMS platforms
- REST API with OpenAPI specification
- NETCONF/YANG for model-driven configuration
Console & Management Ports:
- USB-C Console Port: Modern USB-C interface for local CLI access
- Out-of-Band Management (OOBM) Port: Dedicated 10/100/1000 management port for isolated access
- USB Type-A Host Port: For storing configuration files, logs, or software images
- Bluetooth Adapter: Included for wireless management via Aruba CX Mobile App
Power Supply:
- Power Supply Type: Fixed internal power supply
- Total Power Capacity: Approximately 500W AC
- PoE Budget: 370W allocated for Class 4 PoE
- Switch Power Consumption: 76W (without PoE devices)
- Input Voltage: 100-240V AC auto-ranging
- Frequency: 50/60 Hz
- Energy Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE) support
Cooling:
- Fixed Fans: Internal cooling system optimized for quiet operation
- Airflow Design: Front-to-back airflow with variable-speed fans
- Smart Thermal Management: Adapts fan speeds based on temperature and load
Physical Specifications:
- Dimensions: 1.73" H × 17.4" W × 12.9" D (4.39 cm × 44.2 cm × 32.7 cm)
- Weight: Approximately 11.13 lbs (5.05 kg)
- Mounting: 1RU 19-inch rack-mountable with included rack-mount kit
- Operating Temperature: 32°F to 113°F (0°C to 45°C)
- Storage Temperature: -40°F to 158°F (-40°C to 70°C)
- Humidity: 10% to 90% (non-condensing)
Standards & Certifications:
- IEEE Standards: 802.1D, 802.1p, 802.1Q, 802.1s, 802.1w, 802.1X, 802.3, 802.3ab, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3u, 802.3x, 802.3z
- Safety: UL, cUL, CE, CB
- Emissions: FCC Class A, VCCI, CE
- Environmental: RoHS compliant
Firmware & Operating System:
- Aruba CX Switching OS: Fully programmable, modular, Linux-based operating system
- Python Support: Embedded Python for custom automation scripts
- REST API: Comprehensive RESTful API for programmatic control
- Lifecycle Management: In-service software upgrades with hitless failover
Ideal Applications:
- Enterprise Branch Office Networks: Cost-effective Layer 3 switching with PoE for remote locations
- Campus Access Layer: High-density access switching for classrooms, offices, and common areas
- Small to Medium Business (SMB): Complete network infrastructure with routing, switching, and PoE
- Wireless Network Deployment: Power and connect Aruba wireless access points across large facilities
- IP Telephony: Deploy VoIP phones with integrated PoE power
- IP Surveillance: Support IP cameras with PoE across large facilities
- IoT Device Connectivity: Connect and power sensors, controllers, and smart devices
- Hospitality Networks: Guest and employee network segmentation with Dynamic Segmentation
- Retail Environments: Point-of-sale systems, digital signage, and security cameras
- Healthcare Networks: Medical device connectivity with secure segmentation
- Education: Classroom technology, wireless connectivity, and lab equipment
Included Accessories:
- 1 x HPE Aruba CX 6200F Switch (JL727A)
- 1 x AC Power Cord (US version: NEMA 5-15P)
- 1 x Bluetooth Dongle for Aruba CX Mobile App
- 1 x Rack-mount kit with installation hardware
- Quick Start Guide and documentation
Warranty & Support:
- Standard Warranty: HPE Aruba Networking Limited Lifetime Warranty
- Lifetime advance hardware replacement
- Limited lifetime software updates
- Limited lifetime technical support (business hours)
- Optional Support:
- HPE Foundation Care 24x7 Support
- HPE Aruba Central licensing for cloud management
- Enhanced support packages available
Why Choose the HPE Aruba CX 6200F (JL727A):
The Aruba CX 6200F with 48 ports represents the ideal solution for high-density enterprise access deployments requiring both performance and PoE capabilities. With its generous 370W PoE budget supporting up to 30W per port across all 48 ports, this switch can power wireless access points, IP cameras, and IoT devices throughout large facilities without additional infrastructure. The built-in Network Analytics Engine provides unprecedented visibility into network health with Python-based agents and time-series data storage, while Aruba NetEdit and the CX Mobile App dramatically simplify deployment and ongoing management. Combined with robust Layer 3 routing capabilities, comprehensive security features including Aruba Dynamic Segmentation, Virtual Stacking Framework for up to 384 ports, and cloud-native management via Aruba Central, the JL727A delivers exceptional value for organizations seeking a powerful, secure, and highly manageable enterprise access switch platform.